Fix Revlon Hair Dryer Brush

How To Fix Revlon Hair Dryer Brush? Troubleshooting Guide

Last Updated on September 25, 2023 by Emily

The Revlon Hair Dryer Brush is a popular choice for people looking for a fast and convenient way to dry their hair. Revlon hair dryer brush might be your one step solution to all hair styling woes and you might depend on it heavily. However, like all products, it can sometimes experience problems. You feel in serious trouble when it stops working and might be anxious to look for possible solutions and fixes.

The Revlon Hair Dryer Brush
The Revlon Hair Dryer Brush

Contents

How To Fix Revlon Hair Dryer Brush? (Problem, Reasons and Solutions)

Well there are certain fixes that you can try yourself but then there are other problems that might call for a professional hand. Here are some of the most common Revlon Hair Dryer Brush issues and solutions.

Problem: Revlon Hair Dryer Fails To Turn On Or Stopped Work

There can be plenty of reasons behind why your dryer has stopped working or not even turning on. Here is a list of possible causes that can stop the hair dryer.

Causes and Solutions

Faulty Power Plug

Faulty Power Plug
Faulty Power Plug

A faulty cord or plug can stop the functioning of the dryer for obvious reasons. Check your cord and plug. Reset your plug using the button provided on it.

Incorrect Switch Settings

In most of the power failure conditions, Revlon hair dryer turns on by fixing the power cord back on. If it fails to switch on check for the power switch setting before considering the replacement of the cord and plug. There are four setting options on the setting including off, cool, low and high. Make sure the dryer switch is not set to off. Shift it on cool, low or high setting and check if the problem fixes.

Damaged Setting Dial

If your switch setting are okay and dryer is still not working, it is possible that the setting dial needs replacement or the plug and cord of the dryer needs to be changed.

Broken Fuse

If the cord, switch and dial settings settings a to be fine, then check for a blown fuse or circuit breaker. Replacing a blown fuse or resetting a circuit breaker should solve the problem here. If the problem persists, try resetting the brush by unplugging it for 30 seconds and then plugging it back in.

Problem: Burnt Smell

Burnt smell is Revlon Hair Dryer’s number one complaint. If you smell something burning, it is Revlon Hair Dryer’s warning to you that the appliance is about to fail. There can be plenty of reasons behind why the burnt smell. Here is a list of possible causes of burnt smell and how to get rid of it to fix the the hair dryer.

Causes and Solutions

Overheating

Overheating
Overheating

One of the most common reasons your Revlon hair dryer smells like it’s burning is because it’s overheating. When Revlon hair dryers overheat, they start to smell bad because of all the extra heat. The best way to fix this problem is to unplug your Revlon hair dryer and let it cool down for a few minutes before plugging it back in and trying to use it again.

Revlon Hair Dryer Is Old

If your Revlon hair dryer is starting to smell burnt, even when you haven’t been using it for very long, it might be because the appliance is getting old. Revlon hair dryers have a lifespan of about two years, so if yours is starting to smell bad and it’s been more than two years since you bought it, it might be time to replace it.

Hair Dryer Brush Is Caught

Another possible reason your Revlon hair dryer smells like it’s burning is because the brush is caught. This can happen if Revlon hair dryer’s brush gets tangled in your hair or if you accidentally drop the appliance and the brush hits something hard. If this happens, unplug your Revlon hair dryer and try to gently remove the brush from whatever it’s caught on. Once you’ve done that, plug the hair dryer back in and try using it again.

Blocked Filters

Blocked Filters
Blocked Filters

Revlon hair dryers have filters that can become blocked with lint and other debris. If your Revlon hair dryer’s filters are blocked, it can cause the appliance to overheat and start to smell bad. To fix this problem, unplug your Revlon hair dryer and remove the filters. Clean them off with a brush or a vacuum cleaner and then put them back in place. Once you’ve done that, plug the hair dryer back in and try using it again.

If your Revlon hair dryer continues to smell bad even after you’ve tried all of these troubleshooting tips, it’s time to call a professional. Revlon Hair Dryers are not covered by warranty once they start to smell burnt, so you’ll have to pay for the repairs yourself. However, Revlon hair dryers are relatively inexpensive to replace, so it might be worth just buying a new one instead of trying to fix the old one. Whichever route you choose, make sure you get rid of that burning smell as soon as possible to avoid any further damage to your Revlon hair dryer or your home.

Problem: Extremely Hot

Too hot to touch? If your Revlon Hair Dryer is too hot to touch, it is best to unplug it and let it cool for a moment. Here is a list of possible causes and solutions for fixing a Revlon Hair Dryer Overheating problems.

Causes and Solutions

Revlon Hair Dryer Is Clogged

If your Revlon Hair Dryer is clogged, it will overheat. To clean it, remove the back filter and rinse with warm water. Let the filter dry before putting it back on the dryer.

Not Used Often

If you don’t use your Revlon Hair Dryer often, the motor can overheat from lack of use. To prevent this, run the dryer for a few minutes every week.

Revlon Hair Dryer is used for too long

If you use your Revlon Hair Dryer for too long, it will overheat. To prevent this, use the dryer for no more than 30 minutes at a time.

Hair Dryer Is Placed In Direct Sunlight

If you place your Revlon Hair Dryer in direct sunlight, it will overheat. To prevent this, keep the dryer in a cool, dark place.

Blocked Inlet

If your Revlon Hair Dryer’s inlet is blocked, it will overheat. To clean the inlet, remove the back filter and use a small brush to remove any debris. Let the filter dry before putting it back on the dryer.

Dirty Air Filter

If your Revlon Hair Dryer’s air filter is dirty, it will overheat. To clean the air filter, remove the back filter and rinse with warm water. Let the filter dry before putting it back on the dryer.

Faulty Thermostat

If your Revlon Hair Dryer has a faulty thermostat, it will overheat. To fix this, replace the thermostat with a new one.

Problem: Rattling Noise Or Unusual Sounds Coming Out From The Revlon Hair Dryer

If you are Revlon Hair Dryer and you notice any noisy or unusual sounds coming out from the Revlon Hair Dryer, it is important to immediately stop using the Revlon Hair Dryer and inspect it for any damage. Below are few of the possible causes and solutions for noisy revlon hair dryer.

Causes and Solutions

Faulty Motor Propeller

If you Revlon Hair Dryer is making a rattling noise, it is most likely due to a faulty motor propeller. To fix this, simply replace the old propeller with a new one.

Dirty Motor

If the Revlon Hair Dryer’s motor is dirty, it can also cause noisy sounds. To clean the motor, simply unplug the Revlon Hair Dryer and use a brush to remove any dirt or debris that may be stuck in the motor.

Worn Out Bearings

If the Revlon Hair Dryer’s bearings are worn out, it can also cause noisy sounds. To fix this, simply replace the old bearings with new ones.

A loose or broken blades

If the Revlon Hair Dryer’s blades are loose or broken, it can also cause noisy sounds. To fix this, simply replace the old blades with new ones.

Problem: Heat not working/outlet cold air

If you find that your Revlon hair dryer brush is no longer blowing out hot air, the first thing you should check is the outlet. Make sure that the outlet is not blocked by anything and that it is turned on. If the outlet seems to be fine, then the problem may be with the hair dryer brush itself like breaking of winded wires etc.

Problem: Hair Dryer Air Throw Not up to mark

The first thing that you need to do is to check the airflow of the Revlon hair dryer brush. If the airflow is not up to the mark, then it will affect the performance of the brush. To check the airflow, you need to hold the Revlon hair dryer brush close to your ear and then turn it on. If you can hear a loud noise, then the airflow is good. But, if the noise is very less or you can’t hear anything, then there is a problem with the airflow and you need to get it checked.

Causes and Solutions

If you are facing Insufficient Air Flow Problem, then here are some quick fixes to look for that:

Faulty Barrell

Faulty Barrell
Faulty Barrell

The Revlon One Step hair dryer brush has a transparent plastic barrel. If you can see water inside the barrel, then that means there is some problem with the seal and you will have to get it replaced.

Blocked Filters

Revlon One Step hair dryer brush has two filters- intake and exhaust. If these filters are blocked, then the Revlon One Step hair dryer brush will not work properly. They need to be cleaned properly.

Dirty Nozzles

The Revlon One Step hair dryer brush has two nozzles- one for normal air flow and one for concentrated air flow. If these nozzles are blocked, then the Revlon One Step hair dryer brush will not work properly. To clean the nozzles, make sure to first remove the back cap of the Revlon One Step hair dryer brush.

How To Fix Reset Button On Revlon Hair Dryer ?

How To Fix Reset Button On Revlon Hair Dryer
How To Fix Reset Button On Revlon Hair Dryer

If you find that your Revlon hair dryer is not working properly even after following all the fixes, you may need to reset it. Here’s how:

If you find that your Revlon hair dryer is not working properly, the first thing you should do is unplug it and let it cool for a few minutes. Once it has cooled, locate the reset button on the power adapter. Revlon Hair Dryers come with an adapter that has two buttons – a test button (usually yellow) and a reset button located next to the test button(red).

Press the reset button firmly for a few seconds and then plug the hair dryer back into the wall outlet. Try turning it on again.

You could try unplugging it for a few seconds and then plugging it back in, but if that doesn’t work after you flip the switch and attempt to turn it on again, remove the plug from the wall and press the test button. It should pop or snap, then push in reset button, then reconnect. If it still doesn’t work, you may need to replace the power adapter.

Conclusion

If you’re still having trouble with your Revlon hair dryer brush even after following the above fixes, you may need to take it to a professional for repairs. In the meantime, try using a different brush or drying your hair with a traditional hair dryer. With a little patience and trial-and-error, you should be able to find a solution that works for you.

Similar Posts

Leave a Reply