How To Fix Hair Clippers That Won’t Cut?

Last Updated on September 24, 2023 by Emily

There are a few things that you can do to try and fix hair clippers that won’t cut.

• Make sure that the blades are sharp and clean. If they are dull or dirty, they won’t be able to prune correctly.
• You can also try adjusting the tension on the blade. If it is too loose, the hair clipper won’t be able to cut it perfectly.
• Finally, if all else fails, you can always take it to a professional to have it fixed.

Hair clippers are essential for anyone who likes to keep their hair trimmed and neat. If your hair clippers don’t cut, it could be due to several issues. Here are some reasons why a trimmer may not be cutting properly and how to fix them.

Why Are My Clippers Not Cutting Hair?

If your hair clippers are not cutting correctly, it could be due to many different issues. In most cases, the problem can be fixed relatively easily.

1. The Blade Is Dull: One of the most common reasons hair clippers might not be cutting correctly is that the blade is dull. If you notice that your hair clippers leave your hair looking uneven or jagged, it’s likely because the edge needs sharpening. You can either sharpen the blade yourself or take it to a professional to have it done.

   

2. The Blade Is Not Aligned Correctly: Another common reason for hair clippers not cutting correctly is that the blade is not aligned properly. This can usually be fixed by simply realigning the edge. To do this, you’ll need to remove the sword from the hair clipper and then put it back on, ensuring it’s aligned correctly.

   

3. The Motor Is Not Working Correctly: If your hair clippers are not cutting correctly, it could also be due to a problem with the motor. If the motor is not working correctly, it will need to be replaced.

   

4. Something Is Blocking The Blade: If something prevents the blade from moving freely, it could also be why your hair clippers are not cutting correctly. This could be anything from hair to lint or even skin. If something is blocking the blade, remove it and then try using the hair clippers again.
5. The Hair Clippers Are Not Turned On: This might seem obvious, but it’s worth checking, nonetheless. Make sure that your hair clippers are turned on before using them.

Steps To Fix Hair Clippers

Clean Your Hair Clippers: If your hair clippers aren’t cutting as well as they used to, the first step is to clean them. Quick disassembly and cleaning will remove any built-up hair, gunk, or oil clogging the blades and preventing them from working correctly.

Sharpen The Blades: Once your hair clippers are clean, it’s time to look closer at the blades. If they’re dull, they won’t be able to cut through hair as quickly. You can either sharpen the blades or replace them with a new pair.

Lubricate The Blades: If your hair clippers’ blades are still not cutting as well as they should, try lubricating them. You can use a special blade oil or just a few drops of baby oil. This will help the blades move more smoothly and cut hair more quickly.

Adjust The Tension: The tension of your hair clippers’ blades is also essential. If the edges are too loose, they won’t cut well. But if they’re too tight, they can break. Try adjusting the tension to see if that helps.

Realign Your Hair Clipper Blades: This is the most common reason your hair clippers won’t cut. The good news is that it’s also the easiest to fix. You see, over time, your hair clipper blades will become misaligned. You have to make sure that the edges are correctly aligned. This is the most common reason for hair clippers not cutting properly and is usually an easy fix.

Adjust The Power Screw On Your Hair Clippers: The power screw is the knob on your hair clippers to adjust the blade tension. If your hair clippers are not cutting properly, it is likely because the power screw is not set correctly. To fix this, turn the power screw until the blades are tightened enough to cut through your hair.

Replace Your Clipper Blades: If your clipper blades are dull, they may be why your clippers aren’t cutting correctly. You can purchase new blades for your clippers and then follow the instructions in your user manual to replace them.

Replace Your Hair Clipper Drive: If your hair clipper is still not functioning after trying the above methods, it may be time to replace the drive. The drive is responsible for transferring power from the motor to the blade, so if it is damaged or worn out, it will need to be replaced. You can purchase a new drive online or from a local beauty supply store.

Rotate Your Hair Clippers: If your hair clippers seem to be getting dull, it may help to rotate them. This means that you would use one set of clippers for a while, then switch to another set. Doing this will ensure that all of the blades are getting used evenly and are not wearing down too quickly.

Replace Your Hair Clipper Batteries: If your hair clipper is plugged into the wall outlet and still won’t cut, it may be time to replace the batteries. Batteries generally last for about two years.

Check Your Outlet: The first thing you should do when your hair clippers don’t cut is to check the outlet. Ensure that your outlet is working properly and that the power cord is plugged in correctly. If the outlet is acceptable, then move on to the next step.

This is the most common solution. If your hair clippers are more than 3-5 years old, it’s probably time for a new pair. The blades on your clippers will eventually get dull and won’t cut as well as they used to. A new pair of hair clippers will usually do the trick.

What Causes Hair Clippers To Pull?

If your hair clippers are pulling your hair instead of cutting it, there are a few possible causes. The most common cause is dull blades. When blades become worn, they no longer slice through hair cleanly and can end up yanking out strands of hair instead.

Another possible cause is that the teeth on the blade are not appropriately aligned. This can cause the clippers to snag on hair and pull it out. If the blade is not installed correctly, it can also cause hair pulling.

FAQ’S

How To Stop Clippers From Biting?

If your clippers are biting or pulling your hair, there are a few things you can do to fix the problem:

1. Check the blade to see if it is dull or damaged. If so, replace it with a new one.
2. Make sure the clipper is adequately lubricated. If not, add some oil to the blade.
3. Adjust the blade tension.
4. If the edge is too tight, it will pull your hair. If it is too loose, it will not cut properly.

How To Fix Clipper’s Loud Noise?

If your clippers make a loud noise, it may be due to a dull blade. To fix this, you will need to replace the blade:

1. Make sure that the clipper is unplugged.
2. Remove the old blade by unscrewing the retaining screws.
3. Once the old edge is removed, insert the new knife and screw it in place.
4. Plug in the clipper and test it out.

How To Reset Clippers?

If your clippers are not working correctly, you may need to reset them. To do this, unplug the clippers from the power source and remove the battery. Press and hold the ON/OFF button for 30 seconds. This will reset the clippers, and they should now be working correctly.

Conclusion

There are many reasons why your hair clippers are not cutting properly. In most cases, the problem can be fixed relatively easily. However, if the problem persists, you may need to take your hair clippers to a professional for further diagnosis and repair.